ROM Monitor 0>h ********** HELP MESSAGE ********** b : loads and executes target program d : memory dump c : memory modify f : fill memory dr : dump register cr : modify register z : set/delete break point s : step execution h : display help message, ex. h [command_name] x : execute/continue program install : useful command for install status : display multi cpus status nvram : set/display nvram information clock : dipsplay clock status, stop/start clock version : Display version & etc RESET : invoke a Power-On-Reset(Hard reset) poweroff: invoke a Power-Off scsi: Display scsi inquiry data 0>scsi SPC|ID | Vendor | Product |RMB|Ver.| Device Type ---+---+--------+----------------+---+----+----------------- | 0 | | | | |Not Exists | 1 | | | | |Not Exists | 2 | | | | |Not Exists 0 | 3 | | | | |Not Exists | 4 |TEAC |MT-2ST/N50 | O | 01 |Sequential | 5 | | | | |Not Exists | 6 |FUJITSU |M2624S-512 | X | 01 |Direct ---+---+--------+----------------+---+----+----------------- | 0 | | | | |Not Exists | 1 | | | | |Not Exists | 2 | | | | |Not Exists 1 | 3 | | | | |Not Exists | 4 | | | | |Not Exists | 5 | | | | |Not Exists | 6 | | | | |Not Exists 0>h d ********** HELP MESSAGE ********** d : memory dump [space]d[size] [st_addr [ed_addr]] space: none = kernel space u = user space size: none = Byte s = Short w = Word st_addr: none = end_address of last time hexadecimal = start address ed_addr: none = endless dump. Stop at type of space or ^C hexadecimal = end address 0>h b ********** HELP MESSAGE ********** b : loads and executes target program b [dev][([spec],[unit|spcno-id],[part])] [fname] [option_strings] dev: sd = scsi disk st = scsi tape sl = ttya, s-format spec: 1XX = only loading sd st 0 = file system 0 = dd-format 1 = boot bootstrap 1 = tar-format unit: sd / st X = internal scsi 1X = external scsi unit# | id(sd)| id(st) ------+-------+------- 0,10 | 6 | 4 1,11 | 5 | 3 2,12 | 4 | 2 3,13 | 3 | 1 4,14 | 2 | 0 5,15 | 1 | 6 6,16 | 0 | 5 spcno-id: sd / st spcno: 0 = internal scsi 1 = external scsi id: 0,1,2,3,4,5,6 = scsi id part: sd = 0,1,2,.. partition # st = 0,1,2,.. skip # fname: none = using default - = using default(if you want to set options) strings = boot file name 0>b sd(0,0,0) vmunix Booting sd(0,0,0) vmunix CPU0 is attached with MC88200 CMMU CPU1 is attached with MC88200 CMMU LUNA boot: memory from 0x15e000 to 0x2000000 Kernel virtual space from 0x00000000 to 0x7988000. OMRON LUNA-88K Mach 2.5 Vers 1.51.4 Sat Sep 4 12:51 1993 (GENERIC) physical memory = 32.00 megabytes. available memory = 26.19 megabytes. using 409 buffers containing 3.19 megabytes of memory CPU0 is configured as the master and started. SC0 at e1000000 vector 0x1 sd0 at SC0 slave 6 M2624S-512 [ctr 0,id 6] st0 at SC0 slave 4 MT-2ST/N50 [ctr 0,id 4] mt0 at SC0 slave 4 MT-2ST/N50 [ctr 0,id 4] usc0 at SC0 slave 0 usc1 at SC0 slave 0 XP0 at 71000000 vector 0x2 fd0 at XP0 slave 0 fd1 at XP0 slave 1 lp0 at XP0 slave 4 sio0 at XP0 slave 6 sio1 at XP0 slave 7 AM0 at f1000000 vector 0x4 am0 at AM0 slave 0 Ethernet Address(0:0:a:3:49:9) EX0 at 91100000 vector 0x4 ex0 at EX0 slave 0 FB0 at b1080000 zero vector fb0 at FB0 slave 0 plane 8 NV0 at 45000000 zero vector FZ0 at f1000008 zero vector fz0 at FZ0 slave 0 root on sd0a 33.0MHz MC88100 CPU with MC88200 CMMUs {1}CPU1 is configured as a slave and started. 88Ksingleuser# XP firmware down load. Sat Aug 12 00:46:54 JST 2000 configuring networks. starting system logger. starting local daemons: inetd routed timed sendmail. starting rpc services: portmap rpc.statd rpc.lockd. start kconsd daemon. preserving editor files font load device open failed : 6 clearing /tmp standard daemons: update cron printer jserver. Sat Aug 12 00:47:18 JST 2000 OMRON LUNA-88K (ttya@aurora) login: