After 7 years from initial commit, luna88k SMP support is now stable! (2012/02/29)
OpenBSD/luna88k is an effort to port OpenBSD to OMRON LUNA-88K workstation. Now the sources are merged into OpenBSD CVS tree and the official OpenBSD/luna88k page is also available.
Because of hardware trouble, I could not make 'release' from 4.1. So please use snapshot for now. The installation document is here.
Some settings are available using DIP SW1 in the front panel. See boot_luna88k(8) man page. This is not fixed yet, so functions are subject to change.
Here is a dmesg on LUNA-88K2 with SMP support.
[ no symbol table formats found ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.1-current (GENERIC.MP) #77: Sat Feb 25 10:31:29 JST 2012
aoyama@aurora.in.nk-home.net:/sys/arch/luna88k/compile/GENERIC.MP
real mem = 117440512 (112MB)
avail mem = 112070656 (106MB)
mainbus0 at root: OMRON LUNA-88K2, 33MHz
cpu0: M88100 rev 0xb, 2 CMMU
cpu0: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
cpu1: M88100 rev 0xb, secondary, 2 CMMU
cpu1: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
cpu2: M88100 rev 0xb, secondary, 2 CMMU
cpu2: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
cpu3: M88100 rev 0xb, secondary, 2 CMMU
cpu3: M88200 (16K) rev 0x9, full Icache, M88200 (16K) rev 0x9, full Dcache
clock0 at mainbus0: DS1397
lcd0 at mainbus0
le0 at mainbus0: address 00:00:0a:xx:xx:xx
le0: 32 receive buffers, 8 transmit buffers
sio0 at mainbus0: 7201a
siotty0 at sio0 channel 0
ws0 at sio0 channel 1
wskbd0 at ws0: console keyboard
wsmouse0 at ws0
fb0 at mainbus0: 1280 x 1024, 8bpp
wsdisplay0 at fb0: console (std, vt100 emulation), using wskbd0
spc0 at mainbus0
scsibus0 at spc0: 8 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct fixed serial.IBM_DORS-32160_5U598629_
sd0: 2063MB, 512 bytes/sector, 4226725 sectors
st0 at scsibus0 targ 4 lun 0: SCSI1 1/sequential removable
spc1 at mainbus0
scsibus1 at spc1: 8 targets, initiator 7
sd1 at scsibus1 targ 0 lun 0: SCSI2 0/direct fixed
sd1: 8063MB, 512 bytes/sector, 16514064 sectors
sd2 at scsibus1 targ 1 lun 0: SCSI2 0/direct fixed
sd2: 8063MB, 512 bytes/sector, 16514064 sectors
/dev/ksyms: Symbol table not valid.
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd2
root on sd2a swap on sd2b dump on sd2b
isrdispatch_autovec: stray level 4 interrupt